1.5mm End Mill Standard Length. Single End Square. Shank OD 3mm Flute Length 5mm OAL 38mm - 2 Flutes - Uncoated — HTC Mfg.
1.5mm End Mill Standard Length. Single End Square. Shank OD 3mm Flute Length 5mm OAL 38mm - 2 Flutes - Uncoated
1.5mm End Mill Standard Length. Single End Square. Shank OD 3mm Flute Length 5mm OAL 38mm - 2 Flutes - Uncoated
1.5mm End Mill Standard Length. Single End Square. Shank OD 3mm Flute Length 5mm OAL 38mm - 2 Flutes - Uncoated
1.5mm End Mill Standard Length. Single End Square. Shank OD 3mm Flute Length 5mm OAL 38mm - 2 Flutes - Uncoated
1.5mm End Mill Standard Length. Single End Square. Shank OD 3mm Flute Length 5mm OAL 38mm - 2 Flutes - Uncoated
1.5mm End Mill Standard Length. Single End Square. Shank OD 3mm Flute Length 5mm OAL 38mm - 2 Flutes - Uncoated
1.5mm End Mill Standard Length. Single End Square. Shank OD 3mm Flute Length 5mm OAL 38mm - 2 Flutes - Uncoated
1.5mm End Mill Standard Length. Single End Square. Shank OD 3mm Flute Length 5mm OAL 38mm - 2 Flutes - Uncoated
1.5mm End Mill Standard Length. Single End Square. Shank OD 3mm Flute Length 5mm OAL 38mm - 2 Flutes - Uncoated
1.5mm End Mill Standard Length. Single End Square. Shank OD 3mm Flute Length 5mm OAL 38mm - 2 Flutes - Uncoated
1.5mm End Mill Standard Length. Single End Square. Shank OD 3mm Flute Length 5mm OAL 38mm - 2 Flutes - Uncoated
1.5mm End Mill Standard Length. Single End Square. Shank OD 3mm Flute Length 5mm OAL 38mm - 2 Flutes - Uncoated
1.5mm End Mill Standard Length. Single End Square. Shank OD 3mm Flute Length 5mm OAL 38mm - 2 Flutes - Uncoated
1.5mm End Mill Standard Length. Single End Square. Shank OD 3mm Flute Length 5mm OAL 38mm - 2 Flutes - Uncoated
1.5mm End Mill Standard Length. Single End Square. Shank OD 3mm Flute Length 5mm OAL 38mm - 2 Flutes - Uncoated — HTC Mfg.
1.5mm End Mill Standard Length. Single End Square. Shank OD 3mm Flute Length 5mm OAL 38mm - 2 Flutes - Uncoated
1.5mm End Mill Standard Length. Single End Square. Shank OD 3mm Flute Length 5mm OAL 38mm - 2 Flutes - Uncoated
1.5mm End Mill Standard Length. Single End Square. Shank OD 3mm Flute Length 5mm OAL 38mm - 2 Flutes - Uncoated
1.5mm End Mill Standard Length. Single End Square. Shank OD 3mm Flute Length 5mm OAL 38mm - 2 Flutes - Uncoated
1.5mm End Mill Standard Length. Single End Square. Shank OD 3mm Flute Length 5mm OAL 38mm - 2 Flutes - Uncoated
1.5mm End Mill Standard Length. Single End Square. Shank OD 3mm Flute Length 5mm OAL 38mm - 2 Flutes - Uncoated
1.5mm End Mill Standard Length. Single End Square. Shank OD 3mm Flute Length 5mm OAL 38mm - 2 Flutes - Uncoated
1.5mm End Mill Standard Length. Single End Square. Shank OD 3mm Flute Length 5mm OAL 38mm - 2 Flutes - Uncoated
1.5mm End Mill Standard Length. Single End Square. Shank OD 3mm Flute Length 5mm OAL 38mm - 2 Flutes - Uncoated
1.5mm End Mill Standard Length. Single End Square. Shank OD 3mm Flute Length 5mm OAL 38mm - 2 Flutes - Uncoated
1.5mm End Mill Standard Length. Single End Square. Shank OD 3mm Flute Length 5mm OAL 38mm - 2 Flutes - Uncoated
1.5mm End Mill Standard Length. Single End Square. Shank OD 3mm Flute Length 5mm OAL 38mm - 2 Flutes - Uncoated
1.5mm End Mill Standard Length. Single End Square. Shank OD 3mm Flute Length 5mm OAL 38mm - 2 Flutes - Uncoated
1.5mm End Mill Standard Length. Single End Square. Shank OD 3mm Flute Length 5mm OAL 38mm - 2 Flutes - Uncoated

1.5mm End Mill Standard Length. Single End Square. Shank OD 3mm Flute Length 5mm OAL 38mm - 2 Flutes - Uncoated

End Mill
$7.94 each
Item #
Series
Coating
Quantity
- +

1.5mm cutting diameter, 2 flutes, single end, square end, standard length, uncoated.

This tool cuts 1.5mm diameter, runs a 3mm shank, has 5mm of flute and measures 38mm overall.

The square end cuts a flat floor with a sharp corner — slots, pockets, shoulders and side milling.

Standard length — the general-purpose proportion for most milling.

Uncoated, so the edge stays as sharp as it can be ground — the usual choice for aluminium and other soft, sticky materials.

Specifications

  • Cutting diameter: 1.5mm
  • Shank diameter: 3mm
  • Length of cut (LOC): 5mm
  • Overall length (OAL): 38mm
  • Flutes: 2
  • End type: Single End
  • End geometry: Square End
  • Length style: Standard
  • Coating: Uncoated
  • Series: 950
  • Item number: 950-2059

Recently viewed

Dial In Your Cut

Free TechTips resources for end mill users — machinist tested.

Speeds & Feeds CalculatorsThe right RPM and feed rate for your end mill, material and setup.Open calculator → Chip Load (FPT) CalculatorFeed per tooth keeps carbide cutting instead of rubbing — with chip thinning compensation.Open calculator → MRR CalculatorHow hard your end mill is really working, and where your cycle time goes.Open calculator →

More help: Milling TechTips · Troubleshooting · Carbide vs. HSS Guide