10.5mm End Mill Standard Length. Single End Square. Shank OD 12mm Flute Length 25mm OAL 70mm - 2 Flutes - Uncoated — HTC Mfg.
10.5mm End Mill Standard Length. Single End Square. Shank OD 12mm Flute Length 25mm OAL 70mm - 2 Flutes - Uncoated
10.5mm End Mill Standard Length. Single End Square. Shank OD 12mm Flute Length 25mm OAL 70mm - 2 Flutes - Uncoated
10.5mm End Mill Standard Length. Single End Square. Shank OD 12mm Flute Length 25mm OAL 70mm - 2 Flutes - Uncoated
10.5mm End Mill Standard Length. Single End Square. Shank OD 12mm Flute Length 25mm OAL 70mm - 2 Flutes - Uncoated
10.5mm End Mill Standard Length. Single End Square. Shank OD 12mm Flute Length 25mm OAL 70mm - 2 Flutes - Uncoated
10.5mm End Mill Standard Length. Single End Square. Shank OD 12mm Flute Length 25mm OAL 70mm - 2 Flutes - Uncoated
10.5mm End Mill Standard Length. Single End Square. Shank OD 12mm Flute Length 25mm OAL 70mm - 2 Flutes - Uncoated
10.5mm End Mill Standard Length. Single End Square. Shank OD 12mm Flute Length 25mm OAL 70mm - 2 Flutes - Uncoated
10.5mm End Mill Standard Length. Single End Square. Shank OD 12mm Flute Length 25mm OAL 70mm - 2 Flutes - Uncoated
10.5mm End Mill Standard Length. Single End Square. Shank OD 12mm Flute Length 25mm OAL 70mm - 2 Flutes - Uncoated
10.5mm End Mill Standard Length. Single End Square. Shank OD 12mm Flute Length 25mm OAL 70mm - 2 Flutes - Uncoated
10.5mm End Mill Standard Length. Single End Square. Shank OD 12mm Flute Length 25mm OAL 70mm - 2 Flutes - Uncoated
10.5mm End Mill Standard Length. Single End Square. Shank OD 12mm Flute Length 25mm OAL 70mm - 2 Flutes - Uncoated
10.5mm End Mill Standard Length. Single End Square. Shank OD 12mm Flute Length 25mm OAL 70mm - 2 Flutes - Uncoated
10.5mm End Mill Standard Length. Single End Square. Shank OD 12mm Flute Length 25mm OAL 70mm - 2 Flutes - Uncoated — HTC Mfg.
10.5mm End Mill Standard Length. Single End Square. Shank OD 12mm Flute Length 25mm OAL 70mm - 2 Flutes - Uncoated
10.5mm End Mill Standard Length. Single End Square. Shank OD 12mm Flute Length 25mm OAL 70mm - 2 Flutes - Uncoated
10.5mm End Mill Standard Length. Single End Square. Shank OD 12mm Flute Length 25mm OAL 70mm - 2 Flutes - Uncoated
10.5mm End Mill Standard Length. Single End Square. Shank OD 12mm Flute Length 25mm OAL 70mm - 2 Flutes - Uncoated
10.5mm End Mill Standard Length. Single End Square. Shank OD 12mm Flute Length 25mm OAL 70mm - 2 Flutes - Uncoated
10.5mm End Mill Standard Length. Single End Square. Shank OD 12mm Flute Length 25mm OAL 70mm - 2 Flutes - Uncoated
10.5mm End Mill Standard Length. Single End Square. Shank OD 12mm Flute Length 25mm OAL 70mm - 2 Flutes - Uncoated
10.5mm End Mill Standard Length. Single End Square. Shank OD 12mm Flute Length 25mm OAL 70mm - 2 Flutes - Uncoated
10.5mm End Mill Standard Length. Single End Square. Shank OD 12mm Flute Length 25mm OAL 70mm - 2 Flutes - Uncoated
10.5mm End Mill Standard Length. Single End Square. Shank OD 12mm Flute Length 25mm OAL 70mm - 2 Flutes - Uncoated
10.5mm End Mill Standard Length. Single End Square. Shank OD 12mm Flute Length 25mm OAL 70mm - 2 Flutes - Uncoated
10.5mm End Mill Standard Length. Single End Square. Shank OD 12mm Flute Length 25mm OAL 70mm - 2 Flutes - Uncoated
10.5mm End Mill Standard Length. Single End Square. Shank OD 12mm Flute Length 25mm OAL 70mm - 2 Flutes - Uncoated
10.5mm End Mill Standard Length. Single End Square. Shank OD 12mm Flute Length 25mm OAL 70mm - 2 Flutes - Uncoated

10.5mm End Mill Standard Length. Single End Square. Shank OD 12mm Flute Length 25mm OAL 70mm - 2 Flutes - Uncoated

End Mill
$28.17 each
Item #
Series
Coating
Quantity
- +

10.5mm cutting diameter, 2 flutes, single end, square end, standard length, uncoated.

This tool cuts 10.5mm diameter, runs a 12mm shank, has 25mm of flute and measures 70mm overall.

The square end cuts a flat floor with a sharp corner — slots, pockets, shoulders and side milling.

Standard length — the general-purpose proportion for most milling.

Uncoated, so the edge stays as sharp as it can be ground — the usual choice for aluminium and other soft, sticky materials.

Specifications

  • Cutting diameter: 10.5mm
  • Shank diameter: 12mm
  • Length of cut (LOC): 25mm
  • Overall length (OAL): 70mm
  • Flutes: 2
  • End type: Single End
  • End geometry: Square End
  • Length style: Standard
  • Coating: Uncoated
  • Series: 950
  • Item number: 950-2413

Recently viewed

Dial In Your Cut

Free TechTips resources for end mill users — machinist tested.

Speeds & Feeds CalculatorsThe right RPM and feed rate for your end mill, material and setup.Open calculator → Chip Load (FPT) CalculatorFeed per tooth keeps carbide cutting instead of rubbing — with chip thinning compensation.Open calculator → MRR CalculatorHow hard your end mill is really working, and where your cycle time goes.Open calculator →

More help: Milling TechTips · Troubleshooting · Carbide vs. HSS Guide