20.5mm End Mill Standard Length. Single End Square. Shank OD 22mm Flute Length 38mm OAL 100mm - 3 Flutes - TiN Coat — HTC Mfg.
20.5mm End Mill Standard Length. Single End Square. Shank OD 22mm Flute Length 38mm OAL 100mm - 3 Flutes - TiN Coat
20.5mm End Mill Standard Length. Single End Square. Shank OD 22mm Flute Length 38mm OAL 100mm - 3 Flutes - TiN Coat
20.5mm End Mill Standard Length. Single End Square. Shank OD 22mm Flute Length 38mm OAL 100mm - 3 Flutes - TiN Coat
20.5mm End Mill Standard Length. Single End Square. Shank OD 22mm Flute Length 38mm OAL 100mm - 3 Flutes - TiN Coat
20.5mm End Mill Standard Length. Single End Square. Shank OD 22mm Flute Length 38mm OAL 100mm - 3 Flutes - TiN Coat
20.5mm End Mill Standard Length. Single End Square. Shank OD 22mm Flute Length 38mm OAL 100mm - 3 Flutes - TiN Coat
20.5mm End Mill Standard Length. Single End Square. Shank OD 22mm Flute Length 38mm OAL 100mm - 3 Flutes - TiN Coat
20.5mm End Mill Standard Length. Single End Square. Shank OD 22mm Flute Length 38mm OAL 100mm - 3 Flutes - TiN Coat
20.5mm End Mill Standard Length. Single End Square. Shank OD 22mm Flute Length 38mm OAL 100mm - 3 Flutes - TiN Coat
20.5mm End Mill Standard Length. Single End Square. Shank OD 22mm Flute Length 38mm OAL 100mm - 3 Flutes - TiN Coat
20.5mm End Mill Standard Length. Single End Square. Shank OD 22mm Flute Length 38mm OAL 100mm - 3 Flutes - TiN Coat
20.5mm End Mill Standard Length. Single End Square. Shank OD 22mm Flute Length 38mm OAL 100mm - 3 Flutes - TiN Coat
20.5mm End Mill Standard Length. Single End Square. Shank OD 22mm Flute Length 38mm OAL 100mm - 3 Flutes - TiN Coat
20.5mm End Mill Standard Length. Single End Square. Shank OD 22mm Flute Length 38mm OAL 100mm - 3 Flutes - TiN Coat
20.5mm End Mill Standard Length. Single End Square. Shank OD 22mm Flute Length 38mm OAL 100mm - 3 Flutes - TiN Coat — HTC Mfg.
20.5mm End Mill Standard Length. Single End Square. Shank OD 22mm Flute Length 38mm OAL 100mm - 3 Flutes - TiN Coat
20.5mm End Mill Standard Length. Single End Square. Shank OD 22mm Flute Length 38mm OAL 100mm - 3 Flutes - TiN Coat
20.5mm End Mill Standard Length. Single End Square. Shank OD 22mm Flute Length 38mm OAL 100mm - 3 Flutes - TiN Coat
20.5mm End Mill Standard Length. Single End Square. Shank OD 22mm Flute Length 38mm OAL 100mm - 3 Flutes - TiN Coat
20.5mm End Mill Standard Length. Single End Square. Shank OD 22mm Flute Length 38mm OAL 100mm - 3 Flutes - TiN Coat
20.5mm End Mill Standard Length. Single End Square. Shank OD 22mm Flute Length 38mm OAL 100mm - 3 Flutes - TiN Coat
20.5mm End Mill Standard Length. Single End Square. Shank OD 22mm Flute Length 38mm OAL 100mm - 3 Flutes - TiN Coat
20.5mm End Mill Standard Length. Single End Square. Shank OD 22mm Flute Length 38mm OAL 100mm - 3 Flutes - TiN Coat
20.5mm End Mill Standard Length. Single End Square. Shank OD 22mm Flute Length 38mm OAL 100mm - 3 Flutes - TiN Coat
20.5mm End Mill Standard Length. Single End Square. Shank OD 22mm Flute Length 38mm OAL 100mm - 3 Flutes - TiN Coat
20.5mm End Mill Standard Length. Single End Square. Shank OD 22mm Flute Length 38mm OAL 100mm - 3 Flutes - TiN Coat
20.5mm End Mill Standard Length. Single End Square. Shank OD 22mm Flute Length 38mm OAL 100mm - 3 Flutes - TiN Coat
20.5mm End Mill Standard Length. Single End Square. Shank OD 22mm Flute Length 38mm OAL 100mm - 3 Flutes - TiN Coat
20.5mm End Mill Standard Length. Single End Square. Shank OD 22mm Flute Length 38mm OAL 100mm - 3 Flutes - TiN Coat

20.5mm End Mill Standard Length. Single End Square. Shank OD 22mm Flute Length 38mm OAL 100mm - 3 Flutes - TiN Coat

End Mill
$192.38 each
Item #
Series
Coating
Quantity
- +

20.5mm cutting diameter, 3 flutes, single end, square end, standard length, TiN coated.

This tool cuts 20.5mm diameter, runs a 22mm shank, has 38mm of flute and measures 100mm overall.

The square end cuts a flat floor with a sharp corner — slots, pockets, shoulders and side milling.

Standard length — the general-purpose proportion for most milling.

The TiN coating adds surface hardness and lubricity over uncoated carbide or HSS in general-purpose work.

Specifications

  • Cutting diameter: 20.5mm
  • Shank diameter: 22mm
  • Length of cut (LOC): 38mm
  • Overall length (OAL): 100mm
  • Flutes: 3
  • End type: Single End
  • End geometry: Square End
  • Length style: Standard
  • Coating: TiN
  • Series: 952
  • Item number: 952-3807

Recently viewed

Dial In Your Cut

Free TechTips resources for end mill users — machinist tested.

Speeds & Feeds CalculatorsThe right RPM and feed rate for your end mill, material and setup.Open calculator → Chip Load (FPT) CalculatorFeed per tooth keeps carbide cutting instead of rubbing — with chip thinning compensation.Open calculator → MRR CalculatorHow hard your end mill is really working, and where your cycle time goes.Open calculator →

More help: Milling TechTips · Troubleshooting · Carbide vs. HSS Guide