12mm End Mill Standard Length. Single End Square. Shank OD 12mm Flute Length 25mm OAL 75mm - 4 Flutes - TiN Coat — HTC Mfg.
12mm End Mill Standard Length. Single End Square. Shank OD 12mm Flute Length 25mm OAL 75mm - 4 Flutes - TiN Coat
12mm End Mill Standard Length. Single End Square. Shank OD 12mm Flute Length 25mm OAL 75mm - 4 Flutes - TiN Coat
12mm End Mill Standard Length. Single End Square. Shank OD 12mm Flute Length 25mm OAL 75mm - 4 Flutes - TiN Coat
12mm End Mill Standard Length. Single End Square. Shank OD 12mm Flute Length 25mm OAL 75mm - 4 Flutes - TiN Coat
12mm End Mill Standard Length. Single End Square. Shank OD 12mm Flute Length 25mm OAL 75mm - 4 Flutes - TiN Coat
12mm End Mill Standard Length. Single End Square. Shank OD 12mm Flute Length 25mm OAL 75mm - 4 Flutes - TiN Coat
12mm End Mill Standard Length. Single End Square. Shank OD 12mm Flute Length 25mm OAL 75mm - 4 Flutes - TiN Coat
12mm End Mill Standard Length. Single End Square. Shank OD 12mm Flute Length 25mm OAL 75mm - 4 Flutes - TiN Coat
12mm End Mill Standard Length. Single End Square. Shank OD 12mm Flute Length 25mm OAL 75mm - 4 Flutes - TiN Coat
12mm End Mill Standard Length. Single End Square. Shank OD 12mm Flute Length 25mm OAL 75mm - 4 Flutes - TiN Coat
12mm End Mill Standard Length. Single End Square. Shank OD 12mm Flute Length 25mm OAL 75mm - 4 Flutes - TiN Coat
12mm End Mill Standard Length. Single End Square. Shank OD 12mm Flute Length 25mm OAL 75mm - 4 Flutes - TiN Coat
12mm End Mill Standard Length. Single End Square. Shank OD 12mm Flute Length 25mm OAL 75mm - 4 Flutes - TiN Coat
12mm End Mill Standard Length. Single End Square. Shank OD 12mm Flute Length 25mm OAL 75mm - 4 Flutes - TiN Coat
12mm End Mill Standard Length. Single End Square. Shank OD 12mm Flute Length 25mm OAL 75mm - 4 Flutes - TiN Coat — HTC Mfg.
12mm End Mill Standard Length. Single End Square. Shank OD 12mm Flute Length 25mm OAL 75mm - 4 Flutes - TiN Coat
12mm End Mill Standard Length. Single End Square. Shank OD 12mm Flute Length 25mm OAL 75mm - 4 Flutes - TiN Coat
12mm End Mill Standard Length. Single End Square. Shank OD 12mm Flute Length 25mm OAL 75mm - 4 Flutes - TiN Coat
12mm End Mill Standard Length. Single End Square. Shank OD 12mm Flute Length 25mm OAL 75mm - 4 Flutes - TiN Coat
12mm End Mill Standard Length. Single End Square. Shank OD 12mm Flute Length 25mm OAL 75mm - 4 Flutes - TiN Coat
12mm End Mill Standard Length. Single End Square. Shank OD 12mm Flute Length 25mm OAL 75mm - 4 Flutes - TiN Coat
12mm End Mill Standard Length. Single End Square. Shank OD 12mm Flute Length 25mm OAL 75mm - 4 Flutes - TiN Coat
12mm End Mill Standard Length. Single End Square. Shank OD 12mm Flute Length 25mm OAL 75mm - 4 Flutes - TiN Coat
12mm End Mill Standard Length. Single End Square. Shank OD 12mm Flute Length 25mm OAL 75mm - 4 Flutes - TiN Coat
12mm End Mill Standard Length. Single End Square. Shank OD 12mm Flute Length 25mm OAL 75mm - 4 Flutes - TiN Coat
12mm End Mill Standard Length. Single End Square. Shank OD 12mm Flute Length 25mm OAL 75mm - 4 Flutes - TiN Coat
12mm End Mill Standard Length. Single End Square. Shank OD 12mm Flute Length 25mm OAL 75mm - 4 Flutes - TiN Coat
12mm End Mill Standard Length. Single End Square. Shank OD 12mm Flute Length 25mm OAL 75mm - 4 Flutes - TiN Coat
12mm End Mill Standard Length. Single End Square. Shank OD 12mm Flute Length 25mm OAL 75mm - 4 Flutes - TiN Coat

12mm End Mill Standard Length. Single End Square. Shank OD 12mm Flute Length 25mm OAL 75mm - 4 Flutes - TiN Coat

End Mill
$26.91 each
Item #
Series
Coating
Quantity
- +

12mm cutting diameter, 4 flutes, single end, square end, standard length, TiN coated.

This tool cuts 12mm diameter, runs a 12mm shank, has 25mm of flute and measures 75mm overall.

The square end cuts a flat floor with a sharp corner — slots, pockets, shoulders and side milling.

Standard length — the general-purpose proportion for most milling.

The TiN coating adds surface hardness and lubricity over uncoated carbide or HSS in general-purpose work.

Specifications

  • Cutting diameter: 12mm
  • Shank diameter: 12mm
  • Length of cut (LOC): 25mm
  • Overall length (OAL): 75mm
  • Flutes: 4
  • End type: Single End
  • End geometry: Square End
  • Length style: Standard
  • Coating: TiN
  • Series: 952
  • Item number: 952-4472

Recently viewed

Dial In Your Cut

Free TechTips resources for end mill users — machinist tested.

Speeds & Feeds CalculatorsThe right RPM and feed rate for your end mill, material and setup.Open calculator → Chip Load (FPT) CalculatorFeed per tooth keeps carbide cutting instead of rubbing — with chip thinning compensation.Open calculator → MRR CalculatorHow hard your end mill is really working, and where your cycle time goes.Open calculator →

More help: Milling TechTips · Troubleshooting · Carbide vs. HSS Guide