13mm End Mill Standard Length. Single End Square. Shank OD 14mm Flute Length 30mm OAL 88mm - 4 Flutes - TiN Coat — HTC Mfg.
13mm End Mill Standard Length. Single End Square. Shank OD 14mm Flute Length 30mm OAL 88mm - 4 Flutes - TiN Coat
13mm End Mill Standard Length. Single End Square. Shank OD 14mm Flute Length 30mm OAL 88mm - 4 Flutes - TiN Coat
13mm End Mill Standard Length. Single End Square. Shank OD 14mm Flute Length 30mm OAL 88mm - 4 Flutes - TiN Coat
13mm End Mill Standard Length. Single End Square. Shank OD 14mm Flute Length 30mm OAL 88mm - 4 Flutes - TiN Coat
13mm End Mill Standard Length. Single End Square. Shank OD 14mm Flute Length 30mm OAL 88mm - 4 Flutes - TiN Coat
13mm End Mill Standard Length. Single End Square. Shank OD 14mm Flute Length 30mm OAL 88mm - 4 Flutes - TiN Coat
13mm End Mill Standard Length. Single End Square. Shank OD 14mm Flute Length 30mm OAL 88mm - 4 Flutes - TiN Coat
13mm End Mill Standard Length. Single End Square. Shank OD 14mm Flute Length 30mm OAL 88mm - 4 Flutes - TiN Coat
13mm End Mill Standard Length. Single End Square. Shank OD 14mm Flute Length 30mm OAL 88mm - 4 Flutes - TiN Coat
13mm End Mill Standard Length. Single End Square. Shank OD 14mm Flute Length 30mm OAL 88mm - 4 Flutes - TiN Coat
13mm End Mill Standard Length. Single End Square. Shank OD 14mm Flute Length 30mm OAL 88mm - 4 Flutes - TiN Coat
13mm End Mill Standard Length. Single End Square. Shank OD 14mm Flute Length 30mm OAL 88mm - 4 Flutes - TiN Coat
13mm End Mill Standard Length. Single End Square. Shank OD 14mm Flute Length 30mm OAL 88mm - 4 Flutes - TiN Coat
13mm End Mill Standard Length. Single End Square. Shank OD 14mm Flute Length 30mm OAL 88mm - 4 Flutes - TiN Coat
13mm End Mill Standard Length. Single End Square. Shank OD 14mm Flute Length 30mm OAL 88mm - 4 Flutes - TiN Coat — HTC Mfg.
13mm End Mill Standard Length. Single End Square. Shank OD 14mm Flute Length 30mm OAL 88mm - 4 Flutes - TiN Coat
13mm End Mill Standard Length. Single End Square. Shank OD 14mm Flute Length 30mm OAL 88mm - 4 Flutes - TiN Coat
13mm End Mill Standard Length. Single End Square. Shank OD 14mm Flute Length 30mm OAL 88mm - 4 Flutes - TiN Coat
13mm End Mill Standard Length. Single End Square. Shank OD 14mm Flute Length 30mm OAL 88mm - 4 Flutes - TiN Coat
13mm End Mill Standard Length. Single End Square. Shank OD 14mm Flute Length 30mm OAL 88mm - 4 Flutes - TiN Coat
13mm End Mill Standard Length. Single End Square. Shank OD 14mm Flute Length 30mm OAL 88mm - 4 Flutes - TiN Coat
13mm End Mill Standard Length. Single End Square. Shank OD 14mm Flute Length 30mm OAL 88mm - 4 Flutes - TiN Coat
13mm End Mill Standard Length. Single End Square. Shank OD 14mm Flute Length 30mm OAL 88mm - 4 Flutes - TiN Coat
13mm End Mill Standard Length. Single End Square. Shank OD 14mm Flute Length 30mm OAL 88mm - 4 Flutes - TiN Coat
13mm End Mill Standard Length. Single End Square. Shank OD 14mm Flute Length 30mm OAL 88mm - 4 Flutes - TiN Coat
13mm End Mill Standard Length. Single End Square. Shank OD 14mm Flute Length 30mm OAL 88mm - 4 Flutes - TiN Coat
13mm End Mill Standard Length. Single End Square. Shank OD 14mm Flute Length 30mm OAL 88mm - 4 Flutes - TiN Coat
13mm End Mill Standard Length. Single End Square. Shank OD 14mm Flute Length 30mm OAL 88mm - 4 Flutes - TiN Coat
13mm End Mill Standard Length. Single End Square. Shank OD 14mm Flute Length 30mm OAL 88mm - 4 Flutes - TiN Coat

13mm End Mill Standard Length. Single End Square. Shank OD 14mm Flute Length 30mm OAL 88mm - 4 Flutes - TiN Coat

End Mill
$50.06 each
Item #
Series
Coating
Quantity
- +

13mm cutting diameter, 4 flutes, single end, square end, standard length, TiN coated.

This tool cuts 13mm diameter, runs a 14mm shank, has 30mm of flute and measures 88mm overall.

The square end cuts a flat floor with a sharp corner — slots, pockets, shoulders and side milling.

Standard length — the general-purpose proportion for most milling.

The TiN coating adds surface hardness and lubricity over uncoated carbide or HSS in general-purpose work.

Specifications

  • Cutting diameter: 13mm
  • Shank diameter: 14mm
  • Length of cut (LOC): 30mm
  • Overall length (OAL): 88mm
  • Flutes: 4
  • End type: Single End
  • End geometry: Square End
  • Length style: Standard
  • Coating: TiN
  • Series: 952
  • Item number: 952-4511

Recently viewed

Dial In Your Cut

Free TechTips resources for end mill users — machinist tested.

Speeds & Feeds CalculatorsThe right RPM and feed rate for your end mill, material and setup.Open calculator → Chip Load (FPT) CalculatorFeed per tooth keeps carbide cutting instead of rubbing — with chip thinning compensation.Open calculator → MRR CalculatorHow hard your end mill is really working, and where your cycle time goes.Open calculator →

More help: Milling TechTips · Troubleshooting · Carbide vs. HSS Guide